JQ Series CNG Filling Post for Tube Trailer is a type of CNG dispenser used for refueling CNG tube trailers, HCV, MCV or LCV transport vehicles in the CNG mother stations. It is designed with high flow rate of up to 75 kg/min.
Applications:
The dispenser can be configured with single hose or dual hoses for use in CNG mother stations as well as LCNG stations for filling CNG into transport vehicles and bring it to CNG Daughter Stations to fill NGV or Pressure Reduction Stations for industrial gas supply.
Features:
● Over pressure and over flow protection
● Data protection while power-off
● High-capacity data storage
● Preset volume or amounts
● Re-display recent data
● Self-diagnose and display fault codes automatically
● Mass flow meter with pressure and temperature compensation
● Breakaway protection
● Manual emergency shut-down valve
● IC card automatic settlement and management (optional)
● Bill printer(optional)
● Data transmission interface
Technical Data Sheet:
Technical Parameters | |
Flow range | Filling Post: (3~70)kg/min |
Filling post | One-line one-hose |
Sequential Control Type | Single bank, dual banks or three banks |
Accuracy | +1.0% |
Rated working pressure | 20MPa |
Maximum working pressure | 25MPa |
Ambient Temperature | -45℃~+55℃ |
Explosion-proof Grade | Ex II 2G IIA T3 |
Power Supply | 220V/230V/240V, 50Hz/60Hz |
Working Power | 100W, 200W |
Measuring Unit | Kg, Nm3 or other units upon request |
Minimal Reading | 0.01 |
Single count range | 0～9999.99 |
Accumulative counting range | 0～99999999.99 |
Density preset range | 0.0001 ~ 0.9999 |
Hot Tags: cng time fill post, China, suppliers, manufacturers, factory, made in China, LNG Dispenser for Fleet, CNG Dispenser with Micro Motion Mass Flowmeter, LNG Dispenser for Long Haul Truck, CNG Dispenser for Car cum Bus, Time Fill CNG Dispenser, Hydrogen Dispenser for Fleet
