Pressure Reduction Station is used for separating of particles, pressure regulating and metering of feed gas received in the station.
Main Functions:
● Automatic shutoff for over-pressure, Filtration of particles, pressure regulation, metering and venting.
● Metering System will display simultaneous flow and accumulative flow.
● Pressure regulator is design one operation one standby, and one by-pass.
Main Components：
● Filter
● Pressure Regulator
● Flow Meter
● Pressure Gauge
● By-pass Valve
● Main Valve
1. | Structure | Skid |
2. | Regulating level | Two |
3. | Design temperature | -40 to 60°C |
4. | Medium | CNG |
5. | Inlet pressure | 25 MPa |
6. | Outlet pressure | 0.6 MPa |
7. | Max working pressure | 25 MPa |
8. | Design pressure | 25 Mpa |
9. | NG outlet temperature | ≥10℃ |
10. | Entrance diameter | DN25 |
11. | Export diameter | DN80 |
12. | Safety device | Overpressure discharge, high altitude release device, gas leakage alarm, overpressure automatic emergency cut off. |
13. | Flowrate | 1000Nm3/h |
14. | Working time | Intermittent operation,or 24h continuous operation
|
Hot Tags: pressure reduction station, China, suppliers, manufacturers, factory, made in China, CNG Storage Cascade, Hydraulic Booster Compressor, Mobile CNG Filling Station, NGV Daughter Station, CNG Stationary Cascade, Gas Dehydration Unit
